Due to the current situation involving COVID-19, customers may experience longer than average ship times. Please be assured we are doing everything in our power to get your packages to you in a safe and timely manner.

Blue Water Marine Mega Gloss Med Grey

Product Code: OT3310

Availability: In stock

Blue Water Marine Mega Gloss Med Grey
Condition: New
$11.87 MSRP


Blue water marine mega gloss is a single component topside polyurethane enamel that yields a hard protective coating with super high gloss, color retention, and long durability. Mega gloss is fast drying, and when brushed or rolled gives a smooth finish with excellent handle and flow. This widely used topside polyurethane enamel has tremendous resistance to tough chemicals, cleaning solutions and ultraviolet light with its advanced ultraviolet technology. Can be used on wood, fiberglass, stucco, aluminum and steel.


Additional Information

Specifications Limitations: Do not apply if material, substrate or ambient temperature is below 50°F or above 95°F. Colors: 100+ mixed colors. Finish: Gloss Vehicle Type: Polyurethane Alkyd Resin Solvent Type: High Flash Naphtha VOC: 3.76 lbs. / gal (450 grams / liter) Solids By Weight: 50% Weight Per Gallon: 10 lbs. per gallon (varies by color) Recommended Dry Film: 4.0 mils Coverage: Theoretical coverage at two mils dry is 400 square feet per gallon, and recommended thickness of 4 mils dry would require 2 full coats. Material losses during mixing and application will vary and must be taken into consideration. Expect 50% less coverage on bare, rough or sandblasted surfaces. Viscosity At 75°F (24°C): 70-80 KU Average Dry Time 75°F: Dries to touch in 4 hours. Lower temperatures & higher humidity will slow down dry times. Recommended Reducer: Xylene for spray application, Hi Flash Naphtha for brushing or rolling Resistance To: Chemical Resistance, Abrasion, Oils, Grease, Rust, Corrosion, Mildew, Chipping and Fading Recommended Primers: Pot Life: Not Applicable Shelf Life: Maximum 12 months Mixing: Mechanically mix for 10 minutes, making sure that all solid material is mixed thoroughly. Cleanup: Xylene for Equipment.