Page 15 - CIA_PAP M92 PV & PAP M85 PV Semi-Auto Pistols Manual FINAL

Basic HTML Version

#
Part name
1.
Barrel - Receiver
2.
Pistol grip
3.
Washer
4.
Pistol grip screw
5.
Hammer
6.
Hammer spring
7.
Trigger and hammer pin
8.
Trigger
9.
Disconnector
10.
Disconnector spring
11.
Front sight
12.
Bolt carrier
13.
Bolt body
14.
Firing pin securing pin
15.
Firing pin retainer
16.
Extractor
17.
Extractor spring
18.
Extractor pin
19.
Recoil spring cam
20.
Recoil spring guide, front
21.
Recoil spring
22.
Securing plate, recoil spring
23.
Cover
#
Part name
24.
Cover axle
25.
Washer
26.
Rear sight
27.
Rear sight securing pin spring
28.
Rear sight securing pin
29.
Rear sight axle
30.
Gas tube
31.
Upper handguard spring
32.
Upper handguard
33.
Gas block
34.
Lower handguard retainer
35.
Lower handguard
36.
Safety lever
37.
Magazine catch
38.
Magazine catch pin
39.
Magazine catch spring
40.
Magazine body
41.
Follower
42.
Magazine bottom plate
43.
Magazine spring
44.
Muzzle cap
45.
Retaining spring
PAP M92 & M85 Pistol Manual
© 2012 Century International Arms, Inc.
Page 15
Lubrication Warning
Firing a firearm with oil, grease or any other material even partially obstructing the
bore may result in damage to the firearm and injury to the shooter and those
nearby. Do not spray or apply lubricants directly on ammunition. If the powder
charge of a cartridge is affected by the lubricant, it may not be ignited, but the
energy from the primer may be sufficient to push the bullet into the bore where it
may become lodged. Firing a subsequent bullet into the obstructed bore will
damage the firearm and may cause injury to the shooter and those nearby. Use
lubricants properly.You are responsible for the proper care and maintenance of
your firearm and ammunition.
WARNING!
Altering or modifying parts and/or internal safeties is dangerous and
will void the warranty.This firearm was manufactured to perform properly with the
original parts as designed. It is your duty to make sure any parts you buy are made
for this firearm and are installed correctly and that neither the replacements nor
originals are altered or changed.Your gun is a complex precision tool with many
parts that must relate correctly to other parts in order for proper and safe
operation. Putting a gun together wrong or with incorrect or modified parts can
result in a damaged gun, danger, and injury or death to you and others through
malfunction.Always have a qualified gunsmith work on your gun or at least check
any work not performed by a gunsmith.